| adc_config (defined in ADC_Module) | ADC_Module | |
| ADC_Module(uint8_t ADC_number, const uint8_t *const a_channel2sc1a, const uint8_t *const a_channel2sc1a_diff) | ADC_Module | |
| ADC_num | ADC_Module | |
| adcWasInUse | ADC_Module | |
| analogRead(uint8_t pin) | ADC_Module | |
| analogReadContinuous() __attribute__((always_inline)) | ADC_Module | inline |
| analogReadDifferential(uint8_t pinP, uint8_t pinN) | ADC_Module | |
| calibrate() | ADC_Module | |
| checkDifferentialPins(uint8_t pinP, uint8_t pinN) | ADC_Module | |
| checkPin(uint8_t pin) | ADC_Module | |
| continuousMode() __attribute__((always_inline)) | ADC_Module | inline |
| disableCompare() | ADC_Module | |
| disableDMA() | ADC_Module | |
| disableInterrupts() | ADC_Module | |
| disablePGA() | ADC_Module | |
| enableCompare(int16_t compValue, bool greaterThan) | ADC_Module | |
| enableCompareRange(int16_t lowerLimit, int16_t upperLimit, bool insideRange, bool inclusive) | ADC_Module | |
| enableDMA() | ADC_Module | |
| enableInterrupts() | ADC_Module | |
| enablePGA(uint8_t gain) | ADC_Module | |
| fail_flag | ADC_Module | |
| getMaxValue() | ADC_Module | |
| getPGA() | ADC_Module | |
| getResolution() | ADC_Module | |
| isComplete() __attribute__((always_inline)) | ADC_Module | inline |
| isContinuous() __attribute__((always_inline)) | ADC_Module | inline |
| isConverting() __attribute__((always_inline)) | ADC_Module | inline |
| isDifferential() __attribute__((always_inline)) | ADC_Module | inline |
| isPGAEnabled() __attribute__((always_inline)) | ADC_Module | inline |
| loadConfig(ADC_Config *config) | ADC_Module | inline |
| num_measurements | ADC_Module | |
| readSingle() __attribute__((always_inline)) | ADC_Module | inline |
| recalibrate() | ADC_Module | |
| saveConfig(ADC_Config *config) | ADC_Module | inline |
| setAveraging(uint8_t num) | ADC_Module | |
| setConversionSpeed(uint8_t speed) | ADC_Module | |
| setHardwareTrigger() __attribute__((always_inline)) | ADC_Module | inline |
| setReference(uint8_t type) | ADC_Module | |
| setResolution(uint8_t bits) | ADC_Module | |
| setSamplingSpeed(uint8_t speed) | ADC_Module | |
| setSoftwareTrigger() __attribute__((always_inline)) | ADC_Module | inline |
| singleMode() __attribute__((always_inline)) | ADC_Module | inline |
| startContinuous(uint8_t pin) | ADC_Module | |
| startContinuousDifferential(uint8_t pinP, uint8_t pinN) | ADC_Module | |
| startDifferentialFast(uint8_t pinP, uint8_t pinN) | ADC_Module | |
| startPDB(uint32_t freq) | ADC_Module | |
| startReadFast(uint8_t pin) | ADC_Module | |
| startSingleDifferential(uint8_t pinP, uint8_t pinN) | ADC_Module | |
| startSingleRead(uint8_t pin) | ADC_Module | |
| stopContinuous() | ADC_Module | |
| stopPDB() | ADC_Module | |
| wait_for_cal() | ADC_Module | |
1.8.5 
